News/Events & Publications

QUOTESOFT 2015 USER CONFERENCE & ADVANCED TRAINING
19-Oct-2015

Duct: October 19-20 Piping: October 21-22 New York New York Hotel and Casino Las Vegas, NV Learn more (http://www.quotesoft.com/userconference)..

2015 SMACNA 72ND ANNUAL CONVENTION
29-Sep-2015

September 29, 2015 The Broadmoor Colorado Springs, Colorado Visit Us in Booth 209! Learn more (https://www.smacna.org/annualconvention)..

EASTCOAST VP INVITED TO PANEL DISCUSSION ON MEP TRADE DETAILING AT CANBIM 2015
11-Jun-2015

Introduces New Design to Construction Technology to Designers and Project Managers involved with Building Information Modeling Toronto, ON (June 11, 2015) - Randy Swaim, Vice President of East..

CAD SOFTWARE SUPPORTS SIDE-BY-SIDE VERSION SUPPORT FOR AUTODESK SOFTWARE
06-May-2015

Contractors can run Design to Fabrication software in whichever platform is required for their current project Marlborough, MA(May 6, 2015) - The latest version of EastCoast CAD/CAM's Sheet Me..

RETURN TO REVIT PROVIDES SHEET METAL CONTRACTORS FULL CYCLE BIM FUNCTIONALTY
10-Feb-2015

Support for As-built Revit Deliverables with Duct Families and Tagging Features Added to EC CAD Marlborough, MA (Feb 10, 2015) - The much anticipated release of EastCoast CAD/CAM latest versio..

SMACNA Shows
12-Oct-2014

2014 SMACNA 71st Annual Convention - Oct 12th - 15th , 2014 San Antonio, TX https://www.smacna.org/news/press-releases/2014/10/30/2014-smacna-annual-convention 2015 SMACNA 72nd Annual C..

Stop Cancer
04-Oct-2014

http://www.thetlcfoundation.org/ http://www.superty.org/ SuperTY Hockey Fest (2014, 2015, 2016) http://www.supertyhockey.com/ SuperTy Athlon (2014, 2015) https://www.crowdrise...

EASTCOAST CAD/CAM RAISES AWARENESS AND RESEARCH FOR CHILDHOOD CANCER
11-Sep-2014

Marlborough, MA (September 11, 2014) - David Derocher, President of EastCoast CAD/CAM, recently participated in the First Annual SuperTy Hockey Fest in Jay Peak, Vermont. David and EastCoast CAD/C..

Other Shows
19-Jun-2014

EMCOR Peer Group Meeting 2014 April 22 - 24, 2014 Revit Technology Conference North America July 19 – 21, 2014 Renaissance Schaumburg Convention Center Hotel, Chicago Link: http:..

SPIDA Annual Meetings
02-May-2014

SPIDA 2014 Annual Meeting May 2 -3, 2014 Chicago, IL SPIDA 2015 Annual Meeting May 1-2, 2015 Fort Lauderdale, FLA http://www.spida.org/index.asp..

EASTCOAST RELEASES MORE PIPE AND PLUMBING CONTENT INDEPDENDENT OF SOFTWARE VERSION
01-May-2014

EC CAD Piping Users Supported by Content Update Technology Marlborough, MA (May 1, 2014) - To assist customers in the midst of projects using earlier versions of EC Design to Fabrication softw..

BIM Forum Shows
23-Apr-2014

BIMForum Boston April 23 – 24, 2014 https://bimforum.org/events/70/boston-bimforum/ BIMForum Dallas October 7 - 9, 2014 http://rtcevents.cvent.com/events/rtc-north-america-2014/e..

MCAA Shows
05-Mar-2014

MCAA -Scottsdale, AZ - Mar 2014 http://www.mcaa.org/reporter/archives/2013-10-reporter.pdf MCAA –Maui, HI - Mar 2015 http://www.phcnews.com/content/2015-mcaa-convention..

AHR Shows
14-Jan-2014

AHR - NYC - Jan, 2014 AHR - Chicago IL - Jan, 2015 Learn More (http://www.ahrexpo.com/)..

BARCODE SHIPMENT TRACKING PROVIDED IN EC DUCTMAKER VERSION 6.0
09-Aug-2013

Version 6.0 introduces new wireless scanner technology to EastCoast's flagship fabrication CAM software Marlborough, MA (Aug 9, 2013) - The latest release of EC DuctMaker will now generate and..

EASTCOAST CAD/CAM AND QUOTE SOFTWARE INC SIGN RESELLER AGREEMENT TO EXTEND EASTCOAST PORTFOLIO OF ME
14-Feb-2013

Marlborough, MA (February 14, 2013) - EastCoast CAD/CAM and Quote Software Inc. have announced an Agreement allowing Quote Software's sales team to promote, market and resell EastCoast CAD/CAM's f..

NEW VERSION 5.0 RELEASE PROVIDES EIGHT TO TWENTY TIMES MORE CONTENT-RICH PRODUCTIVITY AND FLEXIBILIT
06-Jul-2012

Marlborough, MA (July 6, 2012) – This month EastCoast CAD/CAM continued its tradition of providing major software enhancements that eliminate redundant detailing tasks by providing U.S. Pate..

PIPING AND PLUMBING ADDED TO PATENTED DESIGN TO FABRICATION WORFLOW FROM AUTODESK REVIT MEP
19-Dec-2011

Marlborough, MA (December 19, 2011) – EastCoast CAD/CAM has just released MEP Fabrication Version 2.2, now with full support for plumbing and piping systems as well as HVAC duct systems. The..

TRAINING AND CORPORATE HEADQUARTERS MOVE FOR EASTCOAST CAD/CAM
23-Nov-2011

Marlborough, MA (Nov 23, 2011) - EastCoast CAD/CAM, leading developer of MEP sheet metal, piping and plumbing solutions for engineers and contractors, has just made its long awaited move to a new ..

EASTCOAST CAD/CAM EXECUTIVE SELECTED FOR MCAA ADVANCED LEADERSHIP INSTITUTE
20-Oct-2011

Marlborough, MA (Oct 27, 2011) – David Quigley, EastCoast CAD/CAM Chief Operating Officer, has just returned from the first week of the Advanced Leadership Institute (ALI) conference, facili..

PRODUCTIVITY ENHANCEMENTS IN MEP 2012 SHEET METAL AND PIPING SOFTWARE FROM EASTCOAST CAD/CAM
05-Aug-2011

Marlborough, MA (Aug 5, 2011) - With full support for Autodesk MEP 2012 software throughout its patented workflow, EastCoast CAD/CAM is pleased to announce the release of Version 4 of its Design t..

EASTCOAST CAD/CAM RELEASES VERSION 3.4 OF THEIR INNOVATIVE MEP DESIGN TO FABRICATION WORKFLOW SOFTWA
14-Mar-2011

Marlborough, MA (March 14, 2011) – EastCoast CAD/CAM is pleased to announce the release of Version 3.4 of its Design to Fabrication (http://www.eccadcam.com/software_solutions/autocad_mep_fa..

NEW SOFTWARE TO PROVIDE AN INTEGRATED DESIGN TO FABRICATION WORKFLOW FOR AUTODESK REVIT MEP 2011 AND
30-Nov-2010

Las Vegas NV (November 30, 2010) EastCoast CAD/CAM announced today the release of two fully integrated Design-to-Fabrication software toolsets: MEP Fabrication Version 1.0 for Autodesk Revit MEP 2..

EASTCOAST ANNOUNCES THE RELEASE OF FABRICATION FOR AUTOCAD MEP 2011 VERSION 3.2, WITH FULL INTEGRATI
12-Nov-2010

Marlborough, Massachusetts (November 12, 2010) - EastCoast CAD/CAM is pleased to announce today the release of Fabrication for AutoCAD MEP 2011 Version 3.2, the latest version of a fully integrated HV..

EastCoast CAD/CAM Releases Highly Sought-after CAD and CAM Line of Fabrication Software Tools Fully
10-Aug-2009

Marlborough, Massachusetts (August 10, 2009) – EastCoast CAD/CAM announced today the release of the newest versions of the company's Mechanical and HVAC CAD and CAM fabrication software solu..

EastCoast CAD/CAM Announces the Release of Fabrication for AutoCADĀ® MEP - A fully embedded HVAC and
20-Oct-2008

Maui, Hawaii (October 20, 2008) – EastCoast CAD/CAM announces immediate availability of its newest HVAC fabrication software, Fabrication for AutoCAD MEP, at the Sheet Metal and Air Conditio..

EastCoast CAD/CAM Signs Joint Development Agreement with Autodesk
21-Feb-2008

ASHRAE, New York, New York (Monday, February 21, 2008) – EastCoast CAD/CAM announces a joint development agreement with Autodesk, Inc., the world leader in 2D and 3D design software for the..

EastCoast CAD/CAM Releases EC Fabrication for AutoCAD MEP 2008 and EC CAD 2008
06-Aug-2007

EastCoast CAD/CAM releases it's 2008 CAD software further establishing its position as the most integrated HVAC and Piping software solution for AutoCAD MEP 2008 Marlborough, MA (August 6, ..

EastCoast CAD/CAM Presents its New AutoCAD-based Software Solution at the AHR EXPO in Dallas from Ja
24-Jan-2007

EastCoast's partners with Autodesk to demo the value and benefits of using Autodesk's industry standard CAD platform with EastCoast's set of easy to use fabrication tools Marlborough, MA (Jan..

EastCoast CAD/CAM Launches EC CAD 2007 AutoCAD Compatible 3D Visualization Software for Collision Ch
22-Aug-2006

EastCoast's 3D Mechanical Drawing Software NOW 100% Compatible with AutoCAD, AutoCAD Building Systems (AutoCAD MEP) and Navis Works Marlborough, MA (August 22, 2006) - EastCoast CAD/CAM annou..